5. How to locate Repair Parts
a. When National stock number or part number is
Z - Nonrepairable item. When unserviceable,
(1) First. Using the table of contents, determine
condemn and dispose at the level indicated in
the functional group within which the item belongs.
This is necessary since illustrations are prepared for
c. National Stock Number. Indicates the National
functional groups and listings are divided into the
stock number assigned to the item and will be used
for requisitioning purposes.
(2) Second. Find the illustration covering the
d. Part Number. Indicates the primary number
functional group to which the item belongs.
used by the manufacturer (individual, company,
(3) Third. Identify the item on the illustration
firm, corporation, or Government activity), which
and note the illustration figure and item number of
controls the design and characteristics of the item
by means of its engineering drawings, specifi-
(4) Fourth. Using the Repair Parts Listing, find
cations, standards, and inspection requirements to
the figure and item number noted on the illustra-
identify an item or range of items.
b. When National stock number or part number is
When a stock numbered item is
requisitioned, t h e repair part
(1) First. Using the Index of National Stock
received may have a different part
Numbers and Part Numbers, find the pertinent
n u m b e r than the part being
National stock number or part number. This index
is in NIIN sequence followed by a list of part
e . Federal Supply Code for Manufacturer
numbers in alphameric sequence, cross-referenced
(FSCY). The FSCM is a 5-digit numeric code listed
to the illustration figure number and item number.
in SB 708-42 which is used to identify the manufac-
(2) Second. After finding the figure and item
turer, distributor, or Government agency, etc.
number, locate the figure and item number in the
f. Description. Indicates the Federal item name
repair parts list.
and, if required, a minimum description to identify
g. Unit of Measure (U/M). Indicates the standard
of the basic quantity of the listed item as used in
performing the actual maintenance function. This
measure is e x p r e s s e d by a two-character
alphabetical abbreviation (e.g., ea. in, pr, etc). When
the unit of measure differs from the unit of issue, the
lowest unit of issue that will satisfy the required
units of measure will be requisitioned.
h. Quantity Incorporated in Unit. Indicates the
quantity of the item used in the breakout shown on
the illustration figure, which is prepared for a
functional group, subfunctional group, or an
4. Special Information
a. The following publication pertains to the
H- 182/PT and its components:
b. The illustrations in this manual are identical to
those published in TM 11-5965-283-34P. Only those
parts assigned the third position SMR maintenance
code "C" or "O" are listed in the tabular listing;
therefore, there may be a break in the item number
organizational authorized items appear in this