TM 32-5835-001-24 & P
tasks identified for the maintenance functions authorized in the maintenance alloca-
tion chart. The symbol designations for the various maintenance levels are as
follows :
C - Operator or crew.
O - Organizational maintenance.
F - Direct support maintenance.
H - General support maintenance.
D - Depot maintenance.
Column 5, Tools and Equipment. Column 5 specifies, by code, those common
e.
tool sets (not individual tools) and special tools, test, and support equipment re-
quired to perform the designated function.
f. Column 6, Remarks. Column 6 contains a letter code in alphabetical order which
is keyed to the remarks contained in Section IV.
B-4. Column Entries Used in Tool and Test Equipment Requirements (Section III).
a. Column 1, Tool or Test Equipment Reference Code. The tool and test equip-
ment reference code correlates with a maintenance function on the identified end item
or component.
b. Column 2, Maintenance Category. The lowest level of maintenance authorized to
use the tool or test equipment.
c. Column 3, Nomenclature. Name or identification of the tool or test equipment.
d. Column 4, National/NATO Stock Number. The National or NATO stock number
of tool or test equipment.
e. Column 5, Tool Number. The manufacturer's part number.
B-5. Explanation of Columns in Section IV.
Reference Code. The code scheme recorded in Column 1, Section III.
a.
b. Remarks. This column lists information pertinent to the maintenance function
being performed as indicated on the MAC, Section II.
B-3