TM 32-5835-005-14 & P
Procedures are limited and can be
The application of Recorder/Reproducer
Set. Sound AN/UNH-17A is not within com-
carried out by operator/crew. Refer
plex equipment systems or equipment
Section II. SITE AND SHELTER REQUIREMENTS
2-4. Shelter Requirements.
The AN/UNH-17A is designed for use in
The AN/UNH-17A is designed for use with
two distinct applications.
an external power source of 115 or 230
VAC or 22 to 30 VDC. The recorder may
a. Vehicular/Aircraft. Refer to para.
be used at any site to which it can be
transported. However, its use for re-
b. Sheltered, The equipment can be
limited by the normal restrictions for
housed in a permanent or semipermanent
shelter during use. Panel extenders are
provided for rack mounting.
Section III. SERVICE UPON RECEIPT OF MATERIAL
c. Modification. Check to see whether
2-5. Checking Unpacked Equipment.
the equipment has been modified. (Equip-
ment which has been modified will have
a. Inspect the equipment for damage
the MWO number on the front panel, near
incurred during shipment. If the equip-
the nomenclature plate.) Check also
ment has been damaged, report the dam-
to see whether all currently applicable
MWOs have been applied. (Current MWO
applicable to the equipment are listed
in DA PAM 1750-10.)
b. Discrepancies. Check the equipment
against the component listing and the
packing slip to see if the shipment is
complete. Report all discrepancies in
accordance with instructions given in
be placed in service even though a
minor assembly or part that does not
affect proper functioning is missing.