TM 32-5835-005-14 & P
Table 3-1. Controls, Connectors and Indicators
CONTROL, INDICATOR OR CONNECTOR
FUNCTION
Potentiometers which permit adjusting the
GAIN CONTROLS
CHAN 1 AND CHAN 2
levels when AGC/MAN switches are in MAN
position.
Input connector on front panel for inter-
INPUT
CONNECTORS,
RCVR
CHAN 1 AND CHAN 2
Input connector on front panel for inter-
INPUT
CONNECTORS,
connecting microphone signal cable.
MIKE
CHAN 1 AND CHAN 2
Output connector for monitor headphone
HEAD
PHONE
permits monitoring signals during record-
ing or reproduction. During recording, the
data signals from receiver are audible in
the headphone; during reproduction only
previously recorded receiver and microphone
(voice) signals are audible in the headphone.
To select proper tape-speed for recording
SPEED
CONTROL
and reproduction, rotate SPEED CONTROL
KNOB to either 15/16 or 1-7/8 position.
In these positions, the speed is constant
within a 2% variation. If the SPEED
CONTROL KNOB is placed in the variable
15/16 or 1-7/8 it permits speed adjustment
up to 30% of the base speeds by rotating
SPEED VARY knob in clockwise or counter-
clockwise direction. The speed vary con-
trol is inoperative in record mode.
SEARCH
Permits controlling tape speed during FAST
FWD (Fast Forward Wind) or REWIND (Re-
wind) modes of operation. Tape speed can
be increased by rotating SEARCH knob in
clockwise direction.
3-4