TM 32-5835-005-14 & P
3-9. Remote Mode of Operation.
NOTE
a. FootSwitch. The AN/UNH-17 can be
During reproduction only, the
remote operated by a footswitch (sup-
base speeds can be varied 30% of either
plied) or a pushbutton control (not
15/16 or 1-7/8 IPS by placing the
supplied) box. A cable with foot switch
SPEED CONTROL knob
and rotating SPEED VARY knob counter-
connected to the REMOTE connector on
the rear of the unit permits three (3)
clockwise for reduced speed, or clock-
remote (Repro-Neutral, Fast Reverse-
wise for increased speed.
Neutral) modes of operation.
During record or stop data signals from
receiver will be audible in the head-
b. Control Box. Provision has been
phones; during reproduction both re-
made (refer to figure 3-2) for connec-
ceiver and microphone signals will not
tion of a remote (not supplied) control
be in the headphones.
box . Connection of a remote control
box would permit remote activation of
3-8. Fast Forward Mode of Operation.
all function controls.
a. To move tape rapidly in a fast for-
3-10. End of Tape Sensor
ward direction, press FAST FWD push-
button.
a. End of Tape Sensor. At the end of
b. The fast forward speed can be
the tape, the end of tape sensor will
varied (increased or decreased) by ro-
cause the unit to automatically go to
tating SEARCH knob in either a clock-
stop.
wise (increase) direction, or counter-
clockwise (decrease) direction, which
permits rapid location of signals
b. Unit will not operate without a
present on tape.
Operating without a cassette
cassette.
in the Record or Reproduce mode will
c. To stop tape motion when desired
result in unit stopping.
portion of tape has been reached, press
the STOP pushbutton.
3-7