TM 11-5835-247-20P
and dispose at the level indicated in position 3.
F
Reparable item. When uneconomically reparable, condemn and dispose at the direct support level.
c. National Stock Number. Indicates the National stock number assigned to the item and will be used
for requisitioning purposes.
d. Federal Supply Code for Manufacturer (FSCM).The FSCM is a 5-digit numeric code listed in SB
708-41/42 which is used to identify the manufacturer, distributor, or Government agency , etc.
e. Part Number. Indicates the primary number used by the manufacturer (individual, company,
requirements to identify an item or range of items.
NOTE
When a stock numbered item is requisitioned, the repair part received may have a different part number than
the part being replaced.
f
Description. Indicates the Federal item name and, if required, a minimum description to identify
the item.
g. Unit of Measure (U/M) Indicates the standard of the basic quantity of the listed item as used in
performing the actual maintenance function. This measure is expressed by a two-character alphabetical
abbreviation (e.g., ea, in, pr, etc). When the unit of measure differs from the unit of issue, lowest unit of issue
that will satisfy the required units of measure will be requisitioned.
h
Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the
illustration figure, which is prepared for a functional group, subfunctional group, or an assembly.
4.
Special Information
a
Usable on codes are shown in the description column. Uncoded items are applicable to all models.
Identification of the usable on codes used in this publication are:
Code Used on
DH6
AN/TNH-24(V)1
DH7
AN/TNH-24(V)2
DH8
AN/TNH-24(V)3
DH9
AN/TNH-24(V)4.
b. The following publication pertains to the AN/TNH-24(V)1 through AN/ TNH-24(V)4 and their
components TM 11-5835-247-12, Sound Recorder-Reproducer Sets AN/TNH-24(V)1 through (V)4
c. The illustrations in this manual are identical to those published in TM 11-5835-287-34P. Only
those parts assigned the third position SMR maintenance code "C" or "O" are listed in the tabular listing;
therefore, there may be a break in the item number sequence. Only illustrations containing organizational
authorized items appear in this manual.
d
National stock numbers (NSN's) that are missing from P source coded items have been applied for
and will be added to this TM by future change/revision when they are entered in the Army Master Data File
(AMDF). Until the NSN's are established and published, submit exception requisitions to Commander, US
Army Communications and Electronics Materiel Readiness Command, ATTN: DRSEL-MM, Fort Monmouth, NJ
07703 for the part required to support your equipment.
5.
How to Locate Repair Parts
a. When National stock number or part number is unknown.
(1) First. Using the table of contents, determine the functional group within which the item
belongs. This is necessary since illustrations are prepared for functional groups and listings are divided into the
same groups.
(2) Second Find the illustration covering the functional group to which the item belongs.
(3) Third. Identify the item on the illustration and note the illustration figure and item number of
the item
(4) Fourth. Using the Repair Parts Listing, find the figure and item number noted on the illustration.
b. When National stock number or part number is known./
(1) First. Using the Index National Stock Numbers and Part Numbers find the pertinent National
stock number or part number. This index is in NIIN sequence followed by a list of part numbers in alphameric
sequence, cross-referenced to the illustration figure number and item number.
(2) Second. After finding the figure and item number, locate the figure and item number in the
repair parts list. as follows:
6.
Abbreviations
Not applicable
2
Previous Page
