(3) Allowance quantities are indicated in the
Explanation
Code
special tools list section for special tools, TMDE, and
reasons (i.e., precious metal content, high
other support equipment.
dollar value, critical material or hazard-
i. 30-Day DS/GS Maintenance Allowances.
ous material).
NOTE
b. Federal Stock Number. Indicates the Federal
Allowances in GS column are for GS
stock number assigned to the item.
maintenance only.
NOTE
(1) The repair parts indicated by asterisk entries
For requisitioning purposes, the Federal
in separate allowance columns for DS and GS
stock number must be converted to the
represent those authorized for use at that category
National stock number by adding "-00-"
of maintenance to be requisitioned on an "as
after the Federal stock classification (FSC)
required" basis, until stockage is based on demand in
code (first four digits). For example, FSN
accordance with AR 710-2.
6625-553-0142 converts to NSN 6625-00-
(2) Allowance quantities are indicated in the
553-0142.
special tool lists section for special tools, TMDE, and
c. Description. Indicates the Federal item name
other support equipment.
and a minimum description required to identify the
j. 1-Year Allowances Per 100 Equipments/
item. The last line indicates the reference number
Contingency Planning Purposes. Column in-
followed by the applicable Federal Supply Code for
tentionally left blank
Manufacturer (FSCM) in parentheses. The FSCM is
k. Depot Maintenance Allowance Per 100 Equip-
used as an element in item identification to designate
ments. This column indicates opposite the first
manufacturer or distributor or Government agency,
appearance of each item the total quantity au-
etc., and is identified in SB 708-42.
thorized for depot maintenance of 100 equipments.
d. Unit of Measure (U/M). Indicates the standard
l. Illustration. Not applicable.
or basic quantity by which the listed item is used in
1-4. Special Information
performing the actual maintenance function. This
measure is expressed by a two-character alphabeti-
Usable on codes are included in column 3. Uncoded
cal abbreviation, e.g., ea, in, pr, etc., and is the basis
items are applicable to all models. Identification of
used to indicate quantities and allowances in
the usable on codes used in this publication are --
subsequent columns. When the unit of measure
Code
Used on
differs from the unit of issue, the lowest unit of issue
BRJ
LS-454/U
that will satisfy the required units of measure will be
requisitioned.
1-5. Location of Repair Parts
e. Quantity Furnished with Equipment (Basic
a. This manual contains one cross reference index
Issue Items Only). Not applicable.
f. Quantity Authorized (Items Troop Installed or
the Federal stock number or reference number
Authorized Only). Not applicable.
(manufacturer's part number) is known. The first
g. Quantity Incorporated in Unit. This column
column in the index is prepared in numerical or
i n d i c a t e s the quantity of the item used in the
alphanumeric sequence in ascending order. The
equipment.
reference numbers (manufacturer's part numbers)
h. 15-Day Organizational Maintenance Allowances.
are listed immediately following the last listed
(1) The repair parts indicated by an asterisk in
Federal stock number in the index of Federal stock
the allowance column represent those authorized for
numbers.
use at the organizational category, and will be
b. When the Federal stock number or reference
requisitioned on an "as required" basis, until
number is known, follow the procedures given in (1)
stockage is based on demand in accordance with AR
and (2) below.
710-2.
(1) Refer to the index of Federal stock numbers
(2) Major Army commanders are authorized to
approve reduction in the range of support items
reference number. The FSN and reference number
authorized for use in units within their commands.
are cross-referenced to the applicable figure and
Recommendations for increase in range of items
item number or reference designation.
authorized for use will be forwarded to the Comman-
(2) Refer to the repair parts list (see V and VII)
der, US Army Electronics Command, ATTN:
and locate the figure number (C Ol 7a -- 20P,
AMSEL-MA-CW, Fort Monmouth, N.J., 07703.
4
Previous Page
