TM 32-5835-001-24 & P
Remarks
Action
Item
Retain
Remove
2 screws (2)
1.
Remove
2. Roller shaft support (3)
Remove
3. Roller 3A4A1A2 (4)
and roller 3A4AlA3 (5)
Retain
Remove
4. 2 springs (6)
Place onto slide plate
5. Roller 3A4A1A2 (4)
and roller 3A4AlA3 (5)
(1).
Install
6. 2 springs (6)
Install
7. Roller shaft support (3)
Install
8. 2 screws (2)
Install
9. Slide plate
10. Housing
Install
Push on roller wheel
Both rollers must be
Push scale
with push scale and check adjusted.
force required to move
roller wheel away from cap-
stan against spring tension.
Force must be 1.25 pounds.
Turn adjustment screw
(item 1, figure 3-39) un-
til correct force is obtained.
3-112
Previous Page
