TM 32-5835-001-24 & P
Remarks
Action
Item
Loosen
Setscrew (2)
2.
Pull from mount.
3. Transducer (3)
Tag and unsolder wires
C filter (4)
4.
leading to capstan motor
3A4A18 (5).
Remove
5.
3 screws (6), lock washers
(7), and flat washers (8)
Remove
6. Capstan motor 3A4A18 (5)
Refer to figure 3-68.
Repair by replacing
7. Capstan motor 3A4A18
defective parts.
Install in chassis.
Capstan motor 3A4A18 (5)
8.
3 screws (6), lock washers
9.
Install
(7), and flat washers (8)
10.
Do not tighten set-
Insert into mount.
Transducer (3)
screw.
Solder wires from capstan
Figure FO-6.
C filter (4)
11.
motor 3A4A18 (5) to ap-
propriate terminals.
Install and adjust.
12.
Belt (1)
Set gap between trans-
Transducer (3)
ducer and gear wheel to
0.015 inch.
Perform final test,
Capstan motor 3A4A18 (5)
steps 3 through 13,
3-176
Previous Page
