TM 11-5835-247-34P
of the basic quantity of the listed item as used in
with the capability to perform complete repair (i.e., all
performing the actual maintenance function.
This
authorized maintenance functions).
This position will
measure is expressed by a two-character alphabetical
contain one of the following maintenance codes:
abbreviation (e.g., ea, in, pr, etc). When the unit of
Code
Application/Explanation
measure differs from the unit of issue, the lowest unit of
issue that will satisfy the required units of measure will
F - The lowest maintenance level capable of complete
be requisitioned.
repair of the support item is the direct support
h. Quantity Incorporated in Unit. Indicates the
level.
quantity of the item used in the breakout shown on the
H - The lowest maintenance level capable of complete
illustration figure, which is prepared for a functional
repair of the support item is the general support
group, subfunctional group, or an assembly. A "V"
level.
appearing in this column in lieu of a quantity indicates
D - The lowest maintenance level capable of complete
that no specific quantity is applicable, (e.g., shims,
repair of the support item is the depot level.
spacers, etc).
Z - Nonreparable.
No repair is authorized.
(3) Recoverability code. Recoverability codes are
4. Special Information
assigned to support items to indicate the disposition
a. Usable on codes are shown in the description
action on unserviceable items. The recoverability code is
column. Uncoded items are applicable to all models.
entered in the fifth position of the Uniform SMR Code
Identification of the usable on codes used in this
format as follows:
publication are:
Code
Used on
Recoverability
DH6
AN/TNH-24(V)1
codes
Definition
DH7
ANITNH-24(V)2
Z - Nonreparable item. When unserviceable, con-
DH8
AN/TNH-24(V)3
demn and dispose at the level indicated in
DH9
AN/TNH-24(V)4
b. Detailed manufacturing instructions for items
position 3.
F - Reparable item. When uneconomically reparable,
source coded to be manufactured or fabricated are found
condemn and dispose at the direct support level.
in TM 11-5835-247-34.
H - Reparable item. When uneconomically reparable,
c. Detailed assembly instructions for items source
condemn and dispose at the general support
coded to be assembled are found in TM 11-5835-247-34.
level.
Assembled components are listed immediately following
D - Reparable item. When beyond lower level repair
the item to be assembled.
capability, return to depot. Condemnation and
d. The following publications pertain to the
disposal not authorized below depot level.
AN/TNH-24(VI1 through AN/TNH-24(V)4 and its
c. National Stock Number. Indicates the National
components:
stock number assigned to the item and will be used for
requisitioning purposes.
TM 11-5835-247-12, Sound Recorder-Reproducer Sets
d. Federal Supply Code for Manufacturer(FSCM).
AN/TNH-24(V)1 through AN/TNH-24(V)4
The FSCM is a 5-digit numeric code listed in SB 708-
TM 11-5835-247-20P Recorder-Reproducer Sets, Sound
41/42 which is used to identify the manufacturer,
AN/TNH-24(V)1 through AN/TNH-24(V)4(To be
distributor, or Government agency, etc -
published)
e. Part Number. Indicates the primary number used
TM 11-5835-247-34, Recorder-Reproducer Sets, Sound
by the manufacturer (individual, company, firm,
AN/TNH-24(V) through(V)4.
e. National stock numbers (NSN's) that are missing
corporation, or Government activity), which controls the
design and characteristics of the item by means of its
from P source coded items have been applied for and
engineering drawings, specifications, standards, and
will be added to this TM by future change/revision when
inspection requirements to identify an item or range of
they are entered in the Army Master Data File (AMDF).
items.
Until the NSN's are established and published, submit
exception requisitions to:
Commander, US Army
NOTE
Communications and Electronics Materiel Readiness
When a stock numbered item is
Command, ATTN: DRSEL-MM, Fort Monmouth, New
requisitioned, the repair part received
Jersey 07703 for the part required to support your
may have a different part number than
equipment.
the part being replaced
f. Description. Indicates the Federal item name
and, if required, a minimum description to identify the
item.
g. Unit of Measure (U/M). Indicates the standard
2
Previous Page
