TM 11-5965-231-14P
Code
Explanation
Explanation
Code
or assembly should result in re-
equipment which are considered
tirement of the end item from the
economically reparable at direct
supply system.
and general support maintenance
X1-
Repair parts which are not procured
levels. When the item is no longer
or stocked. The requirement for
economically reparable, it is
such items will be filled by the
n o r m a l l y disposed of at the GS
next higher assembly or compon-
level. When supply considerations
ent.
dictate, some of these repair parts
X2-
Repair parts, special tools and test
may be listed for automatic return
equipment which are not stocked
to supply for depot level repair as
and have no foreseen mortality.
set forth in AR 710-1. When so
The indicated maintenance cate-
l i s t e d , they will be replaced by
gory requiring such repair parts
supply on an exchange basis.
will attempt to obtain the parts
S-
Repair parts, special tools and test
t h r o u g h cannibalization or sal-
equipment, and assemblies which
vage. The item may be requisi-
are economically reparable at DS
tioned, with exception data, from
and GS activities and which nor-
the end item manager for immedi-
really are furnished by supply on
ate use.
an exchange basis. When items are
G-
Major assemblies that are procured
determined by a GSU to be un-
with PEMA funds for initial issue
economically reparable, they will
o n l y as exchange assemblies at
be evacuated to a depot for evalua-
DS and GS level. These assemblies
tion and analysis before final dis-
will not be stocked above DS and
position.
GS level or returned to depot
T-
High dollar value recoverable repair
supply level.
parts, special tools and test equip-
ment which are subject to special
NOTE
handling and are issued on an ex-
Cannibalization or salvage may be
change basis. Such items will be
used as a source of supply for any
repaired or overhauled at depot
items source coded above except
m a i n t e n a n c e activities only. No
those coded X1 and aircraft support
r e p a i r may be accomplished at
items as restricted by AR 700-42.
lower levels.
U-
Repair parts, special tools and test
(2) Maintenance code. Indicates the
e q u i p m e n t specifically selected
lowest category of maintenance authorized
for salvage by reclamation units
to install the listed item. Capabilities of
because of precious metal content,
c r i t i c a l materials, high dollar
h i g h e r maintenance categories are consi-
value, o r r e u s a b l e c a s i n g s o r
dered equal or better. Maintenance codes
castings.
are -
b. Federal Stock Number. Indicates the
Code
Explanation
C . . . . . . . Crew/operator
Federal stock number assigned to the item
O . . . . . . .. Organizational maintenance
and will be used for requisitioning purposes.
F . . . . . . . . Direct support maintenance
c. Description. I n d i c a t e s t h e F e d e r a l
H . . . . . . . . General support maintenance
item name and a minimum description re-
D . . . . . . . . Depot maintenance
quired to identify the item. The last line
indicates the reference number followed by
t h e applicable Federal Supply Code for
(3) Recoverability code. I n d i c a t e s
whether unserviceable items should be re-
Manufacturer (FSCM) in parentheses. The
turned for recovery or salvage. Items not
FSCM is used as an element in item identi-
coded are nonrecoverable. Recoverability
fication to designate manufacturer or dis-
codes are -
tributor or Government agency, etc., and is
Code
identified in SB 708-42.
Explanation
R-
Repair parts (assemblies and com-
d. Unit of Measure (U/M). Indicates the
p o n e n t s ) , special tools and test
s t a n d a r d or basic quantity by which the
2
Previous Page
