TM 32-5835-001-24 & P
Remarks
Action
Item
1. Power supply (4),
Remove
Retain
4 screws (1),
lockwashers (2),
and flat washers (3)
Items are connected by
Slide power supply out
wiring harness.
of case (7) as far as
possible.
Check for evidence of
2. Power supply (4)
overheating (charred
components) and physi-
cal damage (fractured
cards or open printed
wiring), to fuse card
2A 1(5) and power card
2A 2(8) and for accumu-
lations of dust and dirt.
Check gasket for damage
or excessive dirt.
Inspect for accumula-
3. Recorder (7)
tions of dirt, grease,
and for damage to latches,
hinges, and other compo-
nents. Check for loose
knobs or switches.
Clean using a soft brush
1. Power supply
or compressed air. Clean
case using cleaning com-
pound, lint free rags, and
a soft brush.
Clean external surfaces Figure 2-8 for recorder
2. Recorder
cleaning locations.
using cleaning com-
pound, lint-free rags,
and a soft brush. Clean
audio head using ,a lint-
free swab moistened (not
saturated) with Xylene
(FED-SPEC-TT-X-916B).
2-15
Previous Page
