Removal

TM 32-5835-001-24 & P

b. Organizational troubleshooting consists of performing the procedural steps in

NORMAL INDICATION and CORRECTIVE ACTION columns when indications in the

NORMAL INDICATION columns cannot be obtained, during testing.

2-9. Removal. To remove recorder set from its installed position in aircraft, vehicle,

or shelter for maintenance or replacement perform the following steps:

a.

Disconnect all cables and equipment.

b. Loosen wing screw on baseplate.

c.

Unlatch three latching clips on underside of baseplate.

d. Remove recorder set.

NOTE

To perform test and troubleshooting procedures, a

cassette must be inserted into the recorder set, a

headset connected to HD PHONE jack, a microphone

connected to MIC jack, and the 117 Vac cable con-

nected between the recorder set connector J2 and a

117 Vac power source.

2-11