TM 32-5835-001-24 & P
Telephone Plug Configuration
Preliminary Adjust ment of Equipment.
Make the following checks of the recorder set before
a. Preoperational Checks.
operating.
(1) Check signal cable (if used) and power cable connections to make sure they
are correct and secure.
(2) Check that proper power is available to operate the recorder set by setting
mode selector to REPRO position and pressing BAT TEST button; LEVEL meter
should indicate in green area.
Operational Checks.
b.
(1) Record Mode.
(a) Insert cassette into recorder set.
(b) Connect microphone to MIC jack and headset to HD PHONE jack.
(c) Set mode selector to REC.
(d) Press BAT TEST button.
(e) LEVEL meter should read in green area.
(f) Set channel selector to channel 2 and note counter reading.
(g) Set AGC/MAN 2 switch to AGC .
(h) Press microphone button, speak into microphone, and make short
recording.
(i) LEVEL meter should read in red area while speaking.
2-6
Previous Page
