TM 32-5835-001-24 & P
3-7. Recorder, Electromechanical
a, General Troubleshooting. The procedure in table 3-2 provides information to
troubleshoot electromechanical operations of the recorder under normal operating
conditions.
b. Equipment.
(1) Power Supply
(2) Microphone
(3) Headset
(4) 117 Vac Cable
(5) Test Cable TX-3
c.
Procedure.
(1) Remove recorder housing, refer to paragraph 3-25.
(2) Connect equipment as shown in figure 3-6.
(3) Insert blank cassette into recorder.
(4) Perform procedure listed in table 3-2.
Figure 3-6. Recorder, Electromechanical, Equipment Setup
3-14
Previous Page
