TM 32-5835-001-24 & P
a. General. The procedures in table 3-5 provide information to troubleshoot the
meter drive circuit.
b. Equipment.
(1) Power supply
(2) Voltmeter
(3) Generator
(4) Oscilloscope
(5) Multimeter
(6) 117 Vac Cable
(7) 600 Ohm Load Tx-1
(8) Test Cable TX-3
(9) Test Cable TX-4
(10) Test Cable TX-6
(11) Adapter TX-8
c. Procedure.
NOTE
Make sure a cassette is not in recorder.
(1) Remove recorder housing, refer to paragraph 3-25.
(2) Connect equipment as shown in figure 3-14.
(3) Refer to figure FO-4 for test point and adjustment locations.
(4) Insert blank cassette into recorder.
(5) Perform procedure listed in table 3-5.
3-49
Previous Page
