TM 32-5835-001-24 & P
a. General. The procedures in table 3-6 provide information to troubleshoot the
bias oscillator circuit.
b. Equipment
(11) Test Cable TX-4
(1) Multimeter
(12) Test Cable TX-6
(2) Oscilloscope
(13) Adapter TX-7
(3) Power Supply
(14) Adapter TX-8
(4) 117 Vac Cable
(15) Test Cable TX-10
(5) Generator
(6) Voltmeter
(7) Filter
(8) Blank Cassette
(9) 600 Ohm Load TX-1
(10) Test Cable TX-3
c. Procedure.
(1) Remove recorder housing, refer to paragraph 3-25.
(2) Connect equipment as shown in figure 3-15.
(3) Refer to figure FO-5 for test point and adjustment locations.
(4) Insert blank cassette into recorder.
(5) Perform procedure of table 3-6.
3-55
Previous Page
