TM 32-5835-001-24 & P
Test Procedure.
c.
(1) Remove recorder housing, refer to paragraph 3-25.
(2) Connect equipment as shown in figure 3-18.
(3) Insert blank cassette into recorder.
(4) Referto figure FO-7 for test point locations.
(5) Perform procedure in table 3-8.
a. General. The procedure in table 3-9 provides information to troubleshoot the
reel motor circuit.
b. Equipment.
(1) Multimeter
(2) Power Supply
(3) 117 Vac Cable
(4) Test Cable TX-3
c. Procedure.
(1) Remove housing, refer to paragraph 3-25.
(2) Connect equipment as shown in figure 3-19.
(3) Refer to figure FO-8 for test point locations.
(4) Perform procedure of table 3-9.
NOTE
Be sure a cassette is not in the recorder.
3-65
Previous Page
