TM 32-5835-001-24 & P
Action
Remarks
Item
Loosen three screws (14).
1. Belt (1)
Slide capstan motor (15)
forward. Remove belt (1).
Remove
2. Cap screw (2),
lock washer (3),
flat washer (4),
and capstan
pulley (5)
Remove
3. Cap screw (6),
lock washer (7),
flat washer (8),
and capstan
pulley (9)
2 screws ( 10), lock
Remove
4.
washers ( 11), and
flat washers ( 12)
Tag and unsolder wires
5. Mode selector
from switch terminals.
3A4A4 (13)
6. Mode selector 3A4A4 (13)
Repair by replacing
defective parts.
Use tags to identify
Solder wires to switch
7. Mode selector 3A4A4 (13)
wires.
terminals.
Position on frame.
8. Mode selector 3A4A4 (13)
Install, but do not tighten.
9. 2 screws (10),
lock washers (11),
and flat washers (12)
10.
Place at points "A" and
0.20 in. shims
"B".
Butt against "H" frame.
11. Mode selector 3A4A4 (13)
Tighten.
12.
2 screws (10)
Remove
13. 0.020 in. shims
3-134
Previous Page
