TM 32-5835-001-24 & P
Item
Action
Remarks
19. Capstan pulley (5),
Install
flat washer (4), lock
washer (3), and cap-
screw (2)
20. Belt (1)
Install belt (1). Slide
capstan motor (15) to
the rear to tighten belt
(figure 3-52). Using
spring scale (figure 3-52)
apply a force to rotate
the capstan pulley while
keeping the capstan motor
from turning. The spring
scale reading will be 3.5
to 4-02. in. , before belt
slips on motor shaft.
Tighten screws (14).
21, Front panel
Install
22. Slide plate
Install
23. Housing
Install
Perform final test,
Mode selector 3A4A4 (13)
3-136
Previous Page
