TM 11-5835-241-13&P
TROUBLE SHOOTING
GENERAL.
a. The RD-365/UN is maintained at organizational and direct
Repair parts are listed in table 6-1 and the
support maintenance.
tools and test equipment are listed in Appendix C.
b.
This section contains information and instructions needed
for repair of the equipment.
Information is provided for the removal.,
repair, and replacement of assemblies, as well as all adjustment pro-
cedures. This section also contains all general repair techniques
for printed circuit boards, replacement of transistors and diodes,
and preventive maintenance, cleaning, and lubricating procedures.
ADJUSTMENT PROCEDURES.
The adjust procedures outlined in a through f below provide all
All adjustment controls are set
required adjustment for recorder.
at the factory and normally do not require readjustment unless a re-
pair has been made in a particular circuit which would affect an
If a complete readjustment of the recorder is
adjustment setting.
to be made, perform the procedures in the sequence given in a through
Remove the chassis from the case (paragraph 4-3) to gain
f below.
access to all adjustment controls.
5-1/(5-2 blank)
Previous Page
