TM 32-5835-001-24 & P
Item
Action
Remarks
Power card 2A2 (4)
1.
3 screws (l),
Retain
Remove
lock washers (2),
and flat washers (3)
2.
Power card 2A2 (4)
Move away from power
Connected by wiring har-
supply (5)
ness.
q
Check for fractures,
Replace power card 2A2
if fractures, charring, or
charring, and open
open printed wiring are
printed wiring.
found; otherwise, repair.
Power card 2A2 (4)
Repair by replacing
Figure FO-1
defective parts.
1.
Harness wires
Tag for identification,
F o r installation
2.
Harness wires
Unsolder from terminals.
3. New power card
Position for resoldering.
2A2 (4)
4.
Harness wires
Solder to terminals
identified by tags.
5.
Harness wires
Remove tags
6.
Fuse card 2A1 (4)
Place onto power supply (5)
7.
3 screws (l),
Install
lockwashers (2),
and flat washers (3)
8.
Install
Case
Perform final test,
Power card 2A2 (4)
.
3-81
Previous Page
