TM 32-5835-001-24 & P
Item
Action
Remarks
Fuse card 2A1 (4)
Check for fractures,
Replace fuse card if
charring, and open
fractures, charring, or
printed wiring.
or open wiring are found;
otherwise, repair.
Fuse card 2A1 (4)
1.
3 screws (1),
Remove
Retain
lock washers (2),
and flat washers (3)
Connected by wiring har-
Move away from power
supply (5)
ness.
q
Repair by replacing
Figure FO-1.
defective parts.
Tag for identification.
1.
For installation
Harness wires
2.
Harness wires
Unsolder from terminals.
3. New fuse card
Position for resoldering.
2A1 (4)
4.
Solder to terminals
Harness wires
identified by tags.
5.
Harness wires
Remove tags.
6.
Place onto power supply (5) .
Fuse card 2A1 (4)
7.
3 screws (1) ,
Install
lock washers (2),
and flat washers (3)
Install
8. Case
Fuse card 2A1 (4)
Perform final test,
3-77
Previous Page
