National Stock Number

TM 32-5835-001-24 & P

c. National Stock Number. Indicates the National stock number assigned to the

item and which will be used for requisitioning.

d. Part Number. Indicates the primary number used by the manufacturer (individ-

ual, company, form, corporation, or Government activity), which controls the design

and characteristics of the item by means of its engineering drawings, specifications,

standards, and requirements to identify an item or range of items.

NOTE

When a stock numbered item is requisitioned, the item received may have a

different part number than the part being replaced.

e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric

code listed in SB 708-42 which is used to identify the manufacturer, distributor, or

Government agency, etc.

f. Description. Indicates the Federal item name and, if required, a minimum

description to identify the item. The physical security classification of the item is in-

dicated by the parenthetical entry (insert applicable physical security classification

abbreviation, e.g., Phy Sec C1 (C)-Confidential, Phy Sec C1 (S)-Secret, Phy Sec C1

(T)-Top Secret). Items that are included in kits and sets are listed below the name of

the kit or set with the quantity of each item in the kit or set indicated in the quantity

incorporated in unit column. When the part to be used differs between serial numbers

of the same model, the effective serial numbers are shown as the last line of the

description. In the Special Tools List, the initial basis of issue (BOI) appears as the

last line in the entry for each special tool, special TMDE, and other special support

equipment. When density of equipments supported exceeds density spread indicated

in the basis of issue, the total authorization is increased accordingly.

Unit of Measure (U/M). Indicates the standard of the basic quantity of the

listed item as used in performing the actual maintenance function. This measure is

expressed by a two-character alphabetical abbreviation (e. g., ea, in, pr, etc). When

the unit of measure differs from the unit of issue, the lowest unit of issue that will

satisfy the required units of measure will be requisitioned.

h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the

breakout shown on the illustration figure, which is prepared for a functional group,

subfunctional group, or an assembly. A "V" appearing in this column in lieu of a

quantity indicates that no specific quantity is applicable, (e.g., shims, spacers, etc).

C-4. Special Information.

a. Usable on codes are shown in the description column. Uncoded items are

applicable to all models. Identification of the usable codes used in this publication

are:

Used On

Code

V1 (aircraft) Configuration

A

V2 (vehicle) Configuration

B

V3 (shelter) Configuration

C

C-5