TM 32-5835-005-14 & P
OPERATOR/CREW MAINTENANCE
INSTRUCTIONS
Section I. TOOLS AND
EQUIPMENT
(a) Cleaning compound (National stock
Equipment Required.
No. 7930-00-395-9542).
Repair parts, tools, test equipment,
(b) Cloth, textile, cheesecloth (National
and accessories issued with or author-
stock No. 8305-00-267-3015).
ized for use by the operator for the
(c) Xylene (Federal Specification-TT-X-
Recorder/Reproducer Set, Sound AN/UNH-
17A are listed in the Maintenance
916B).
Allocation Chart, appendix B of this
manual. Materials required for main-
tenance are listed below.
Section
II.
LUBRICATION
INSTRUCTIONS
4-2. Lubrication.
No lubrication is required, all rotating
parts use sealed bearings.
Section
III.
PREVENTIVE
MAINTENANCE
CHECKS
AND
SERVICES
(1) Daily preventive maintenance checks
4-3. General.
and services. Table 4-1.
To insure that the Recorder/Reproducer,
(2) Weekly preventive maintenance checks
Set Sound AN/UNH-17A, is always ready
for operation, it must be inspected sys-
and services. Table 4-2.
tematically so that defects may be dis-
covered and corrected before they result
(3) Cleaning. Paragraph 4-6.
in serious damage or failure.
(4) Troubleshooting. Paragraph 4-7.
4-4. Scope of Operator's Maintenance.
4-5. Operator's Preventive Maintenance.
The maintenance duties assigned to the
Operator's preventive maintenance is the
operator of the AN/UNH-17A are listed
systmatic care, servicing, and inspec-
below together with a reference to the
tion of the AN/UNH-17A to prevent the
paragraphs covering the specific mainte-
nance functions. These duties assigned
occurance of trouble, to reduce down-
do not require special tools or test
time, and to assure that the equipment
equipment.
is serviceable.
4-1
Previous Page
