TM 32-5835-005-14 & P
Note: This table covers only items used by the operator; items used by higher
level maintenance personnel are covered in instructions for the appropriate
maintenance level.
CONTROL, INDICATOROR CONNECTOR
FUNCTION
FIGURES 3-1, 3-2
A 3-digit (999) counter is belt driven
COUNTER
from the take-up reel drive. Counter
permits the operator to index a specific
point on the tape, record some data, re-
wind tape to the index point, and re-
produce the data.
A mechanical device which disengages the
EJECT
tape cartridge from the transport drive
for easy removal. CASSETTE DOOR must
be open.
Push button control which resets tape
RESET
index counter to 000 when pressed.
Permits speed adjustment up to 30% of
SPEED
VARY
base speeds.
To select the fast reverse (rewind)
REWIND
mode, depress the REWIND push button.
To stop tape motion, depress the STOP
STOP
button.
To reproduce recorded signals, depress
REPRO
the REPRO push button. SPEED CONTROL
must be at either 15/16 or 1-7/8 position
corresponding to the speed at which the
signals were originally recorded. AGC
MANUAL (either channel 1 or 2) switch
in MANUAL position, adjust GAIN
(either channel 1 or 2) to desired
listening level.
To activate the fast forward mode of
FAST
FWD
operation, press FAST FWD (fast for-
ward wind) push button. The tape will
move in forward direction, the speed
of which can be controlled by rotating
SEARCH knob i.e. increasing in clock-
wise direction and decreasing in counter-
clockwise direction.
Previous Page
