TM 32-5835-005-14 & P
8-33. Items to be Inspected.
Inspection
Procedures
SETTINGS
CONTROL
STEP
PERFORMANCE
TEST PROCEDURE
TEST
EQUIPMENT
NO.
STANDARDS
UNDER TEST
EQUIPMENT
Controls
N/A
may be in
any posit-
ion.
a. No breaks, burns,
Inspect wires, leads, conn-
1.
corrosion, loosened
actions, insulation and pro-
connections or damage.
jective coating.
b. No cracked or inade-
quate protective coating
on circuit boards.
No breaks, burnouts,
Inspect printed circuits.
2.
corrosion, loosened eyelets
and feed-through terminals
or lack of protective
coating.
Mounting screws must
Inspect mounting screws.
3.
not be longer than speci-
fied as improper length
may damage adjacent
component or cause
shorts.
No conductive particles,
Inspect general assembly.
4.
jumper clippings or solder
drops.
No burnouts, bubbles,
Inspect resistors, and
5.
or lack of protective
capacitors.
coatings.
6.
broken joints, excessive
solder.
No insecure mountings,
Inspect connectors and
7.
bent or missing pins,
damaged shells.